MPPS V1x


MPPS

Requirements:

  • Laptop with Windows OS
  • MPPS clone V12 or later, Interface and Program
  • Laptop and vehicle battery is fully charged or use charger / power supply
  • WiFi, Bluetooth, virus scanners disabled and any power saving options on the laptop off.
  • Install program , see : Instructions for Installation.doc
  • Laptop restart.

MPPS_V12_Screen-shot

1. Reading ECU Data and Program
  • In the Reading Options menu, choose complete (K-Line)
  • select Manufacturer and model (here EDC16 + C39)
  • Ignition on , engine not started.
  • Id query selection , press F1 to read ECU info , to test theConnection. Should errors occur you possibly have to play with theCOM port settings.
  • Control unit information appears in the right pane
  • Select Read F2 to download the entire ECU. You must have to enter a
  • File name ( ending please .bin ).
  • the process takes approximately 45
  • Minutes.
  • if the operation wasn’t error-free run through again.
  • That’s it .
2. ECU flash
  • Manufacturer and model selection (here EDC16 + C39)
  • Ignition on , engine not started.
  • Id query selection , press F1 to read ECU info , to test theConnection. Should errors occur you possibly have to play with theCOM port settings.
  • Control unit information appears in the right pane
  • Select F3 to flash the ECU. You have to select the File name.
  • Duration of the process about 20 seconds.
  • There may appear some error messages in the vehicle dashboard display, such as VDC not
  • available , etc.
  • This is normal because the ECU is in flash mode.
  • When the process is completed at 100 % please wait 10 seconds, ignition off,
  • wait about 15 seconds , turn ignition on, start engine.
  • Done.